Skip to main content
Cleaning stainless steel or aluminium, oven front panel / door
Electrolux Support

Cleaning stainless steel or aluminium, oven front panel / door

To clean stainless steel or aluminum, oven front panel / door, refer to the suggestions below for step by step instructions.

Treatment of stainless steel:

Before installation:

A new product is often delivered with a thin protective film over the stainless steel. 

  • Remove the film.
  • Clean the surface with a cleaning spirit to remove any remaining solvent from the glue. Clean along the grain of the steel.
  • Wash with warm water and dishwashing detergent.
  • Wipe down with a clean dry cloth.
  • Polish with a steel care product. Always polish along the grain of the steel.
  • Afterwards, polish with a clean dry cloth to remove any excess steel care product / oil. Polish again along the grain of the steel.

During use:

  • Wash with warm water and dishwashing detergent.
  • Wipe down with a clean dry cloth.
  • Polish with a steel care product. Always polish along the grain of the steel.
  • Afterwards, polish with a clean dry cloth to remove any excess steel care product / oil. Polish again along the grain of the steel.
Treatment of aluminum:
  • Clean the surface with a solution of soap and water. 
  • If thorough cleaning is necessary, make a mixture of alcohol and cleaning chalk.
  • Apply directly with a cloth.

 

All necessary care products are available in our Webshop. (You can visit our webshop by clicking on the link below).